But fun to know I have things tweaked to the max. Stability testing this on Prime95 to ensure my single core loads were stable and all MT loads were stable was time consuming at best. However when running MT loads, you can get away with less voltage on the other cores, allowing for lower temps and better boosting overall as clocks remain lower (4.9Ghz or lower). The idea being that your best cores that run the single/low core loads need more voltage to remain stable as they run higher clocks (5.1Ghz+). I run my best 4 cores on CCD0 at -20, and I run my best 2 cores on CCD1 at -20. It is by far the best way to overclock Ryzen 5000 CPUs for ST and MT combined performance. So using negative numbers, you are under-volting and essentially allowing the CPU to boost higher over the range of allowable voltages (up to 1.5V). It's an offset, so lower values = higher clocks at lower voltages. Passive mode feels great for temp below 40deg.Click to expand.Correct. I’m still wondering if there is any way to change limits from 80 deg to some lower value, so the body does not feel warm and fans start to run earlier. I always used a desktop PC where fans run all the time and temps basically aren’t the case for me. It’s my first laptop and i’m still gettin’ to it. So it looks like, i’ve panicked to quickly and fans are running properly. When temps go up above 80deg, then fans start to cool and even speed up a little, then the temp start falling to 40 deg, and when the load disappears, the fans turn off. I made another test, this time with “always on fan” turned off in BIOS and the same cpu-x benchmark for 6 threads for 3 mins. I think it’s not the most demanding benchmark anyways (maybe?) The benchmark was prime number for 3 minutes and 6 cores. I’ve checked the boxes in gkrellm and monitored it while running cpu-x benchmark.

All other options during the scan had no sensors found. It seems to appear this way every time i run sensors-detect. Using driver `i2c-piix4’ for device 0000:00:14.0: AMD KERNCZ SMBus The only thing found is:ĭo you want to probe the I2C/SMBus adapters now? (YES/no): yes Well, sensors-detect didn’t find any new sensors.

Control ryzen